smart_hub_en.pdf
Smart HUB
BE WAVE system controller
Smart HUB is the BE WAVE system controller, combining home automation features with protection against burglary, fire, and other random events.
The device has a built-in Ethernet (LAN) port and WiFi module. The system can be managed and controlled using the BE WAVE mobile application or the BE WAVE Soft software.
- compliance with EN 50131 Grade 2
- support for up to 128 ABAX 2 system wireless devices
- operation in the 868 MHz frequency band
- AES encrypted two-way radio communication
- transmission channel diversity – 4 channels for automatic selection of the one that will enable transmission without interference with other signals
- additional transmission channel to receive images from the Motion Detector Cam
- virtual IP devices
- IP zones (receiving HTTP notifications)
- IP outputs (sending HTTP notifications)
- capability to assign devices to 50 rooms
- capability to arm the system fully or partially (9 configurable partial modes)
- built-in modules
- Ethernet (reporting to monitoring station, mobile application, push and e-mail notifications)
- WiFi 2,4 and 5 GHz (reporting to monitoring station, mobile application, push and e-mail notifications)
- system control using
- BE WAVE mobile application (simultaneous access by multiple users)
- BE WAVE Soft configuration software
- Smart Keypads
- remote control keyfobs
- up to 50 users
- up to 100 scenes and routines
- up to 50 schedules with option to be used for routines
- 8000 event log entries
- powered by 230 V AC
- back-up battery
- battery charging circuit
- battery status control and low battery disconnect system
- tamper protection against enclosure opening and removal from mounting surface
- capability to update firmware of the control panel and the devices in the system
- programming of control panel setting
- BE WAVE Soft configuration software or BE WAVE mobile app
- communication via the local network or connection established through the Internet using the SATEL server
The actual appearance of the products may differ from the presented images. Product descriptions are provided in the web service for information purposes only.
Documentation
Software
Certificates
Technical Data
Operating temperature range
-10°C...+55°C
Weight
406 g
Maximum humidity
93±3%
Battery cut-off voltage (±10%)
2,7 V
Operating frequency band
868,0 ÷ 868,6 MHz
Radio communication range (in open area)
up to 2000 m
Dimensions
158 x 158 x 30 mm
Environmental class according to EN50130-5
II
Complied with standards
EN 50130-4, EN 50130-5, EN 50131-1, EN 50131-3, EN 50131-5-3
Supported memory cards
microSD, micro SDHC
Battery charging current
185 mA
Maximum power consumption
2,65 W
Security grade according to EN50131-1
Grade 2
Standby current draw from battery
252 mA
Standby power consumption
1,82 W
Low battery notification voltage
3,2 V
Battery operating temperature (discharging)
-10°C...+60°C
Battery operating temperature (charging)
0°C...+45°C
Battery
18650 3,6 V / 3200 mAh
Supply voltage
230 V AC, 50 Hz